loading

Do fans need to be controlled via Modbus?

2026-04-03

No. Fans and auxiliary systems are controlled internally by the PLC.
However, the main power must be switched on locally before operation.

Can the load setpoint (kW) be written via Modbus registers?

Is there an energy meter installed?

Related questions

The PLC can be connected via Ethernet (RJ45)? Is it a standard 100 Mbps connection?

Yes. The PLC inside the load bank is connected to an industrial Ethernet switch (PoE type), supporting a standard 100 Mbps Ethernet connection.
The upper-level PC/SCADA system can connect directly to the RJ45 port of this switch.

What protection functions does our Resistive/Liquid Cooled/Rack Mounted /Resistive-Inductive load bank feature?

Protections include:

Overtemperature
Low airflow
Fan overload

Interlock: Local/Remote mode selection (mutually exclusive)

Are there any additional operating steps after the load is energized?

Switch control mode to Remote
Start fans

Can you provide Modbus register list in advance?

The register list will be provided after production is completed.

How long do fans run after stop?

Approximately 5 minutes (controlled by PLC timer).

How long does it take to start?

Fans start: < 500 ms
Contactor response: 50–150 ms

GET IN TOUCH WITH Us

Rata Load Banks

About us

Quick Links

Contact Us

Contacts: Gong Zhenhua

E-mail: gongzhenhua@rata.top

Phone/ WhatsApp: 0086-13890270038

Address: Hongyu Road East, Jinshan Industrial Park, Luojiang Disctrict, Deyang. China

Application

Resource

authorization and Cooperation

Copyright © 2026 Rata |Sitemap

detect