How To Choose And Use The Reactive Load Bank Correctly?
A reactive load bank is one of the best tools for simulating load testing. But before starting the testing phase, the load bank needs to be prepared. Now, there are several ways to calibrate the device. We didn't delve deeper into the same thing. However, we will give you advice on how to prepare the reactive load bank.
Check operation accuracy
Before starting a simulation with a reactive load bank, an electrical professional will check the accuracy of the operation and then adjust it to the manufacturer's specifications.
Engineers will specifically test the communication and sensing functions in the load bank. If they feel they are not well calibrated, they should restore them to their original values so they can be properly tested.
Manage cables
Cable management is an important part of load group management because if not handled properly, the actual value cannot be obtained.
In the first stage, the professional will evaluate the length and thickness of the cable, the magnetic field and the ambient temperature. Again, they will arrange the correct cables so that the actual values can be reached.
Optimize fans and controls
The load bank is usually powered by an external power system. Therefore, before testing with a reactive load bank, a professional will first measure the amount of power required to start the system. Likewise, they will arrange the necessary systems to power the system. If everything is in order, the specialist will start the testing process.
Influence of solar radiation on reactive load bankes
Before starting the load simulation process, experts will check whether the load bank is affected by solar radiation, especially if it is left in an outdoor area. If they notice it is affected by heat, they will take the necessary safety measures in order to get accurate results.
Usually, experts use a covering on the outer surface to protect it from radiation.
Check the thresholds of the load bank
Companies that offer load bank rentals recommend a safety check before testing. This requires an expert to check the maximum threshold by slowly increasing the load. This helps to better calibrate the load bank and get the correct values. Also, setting the desired load before testing will cause the device to function properly.
Set the proper voltage
Preparation of the load bank also includes setting the appropriate voltage levels before the test begins.
By doing this, not only can accurate values be obtained, but the device can also be kept in a " safe zone " that does not exceed a threshold . Therefore, after determining the load, experts will set the voltage according to the industrial requirements.
Monitor performance before final testing
Even if the load bank is properly calibrated, it may not perform well during the testing phase. So, after the test is ready, experts monitor it before it takes place, and doing so ensures that you get the correct results you want.
Typically, reactive load banks are prepared in these ways. But some steps can be added or removed depending on customer requirements and newer models.
For most test sites, the purchase cost of reactive load bankes is too high. For this reason, we detect that customers choose professional load bank manufacturers to rent services, which can reduce the cost of use. Of course, if you will use the reactive load bank for a long time, we still recommend that you directly purchase a suitable reactive load bank product.
